RS232

25 PIN D-SUB MALE (At the DTE)
25 PIN D-SUB FEMALE (At the DCE)

25 PIN D-SUB MALE at the DTE (Computer).
25 PIN D-SUB FEMALE at the DCE (Modem).

Контакт Сигнал ITU-T Dir Описание
1 GND 101 --- Shield Ground
2 TXD 103 --> Transmit Data
3 RXD 104 <-- Receive Data
4 RTS 105 --> Request to Send
5 CTS 106 <-- Clear to Send
6 DSR 107 <-- Data Set Ready
7 GND 102 --- System Ground
8 CD 109 <-- Carrier Detect
9 -   - RESERVED
10 -   - RESERVED
11 STF 126 --> Select Transmit Channel
12 S.CD ? <-- Secondary Carrier Detect
13 S.CTS ? <-- Secondary Clear to Send
14 S.TXD ? --> Secondary Transmit Data
15 TCK 114 <-- Transmission Signal Element Timing
16 S.RXD ? <-- Secondary Receive Data
17 RCK 115 <-- Receiver Signal Element Timing
18 LL 141 --> Local Loop Control
19 S.RTS ? --> Secondary Request to Send
20 DTR 108 --> Data Terminal Ready
21 RL 140 --> Remote Loop Control
22 RI 125 <-- Ring Indicator
23 DSR 111 --> Data Signal Rate Selector
24 XCK 113 --> Transmit Signal Element Timing
25 TI 142 <-- Test Indicator
Примечание: Direction is DTE (Computer) relative DCE (Modem).
Примечание: Do not connect SHIELD(1) to GND(7).
Опубликовал: Joakim Ogren, Petr Krc
Источник: ?
Все комментарии присылайте Joakim Ogren.

Serial (PC 9)

9 PIN D-SUB MALE (в компьютере)

9 PIN D-SUB MALE в компьютере.

Контакт Сигнал Dir Описание
1 CD <-- Carrier Detect
2 RXD <-- Receive Data
3 TXD --> Transmit Data
4 DTR --> Data Terminal Ready
5 GND --- System Ground
6 DSR <-- Data Set Ready
7 RTS --> Request to Send
8 CTS <-- Clear to Send
9 RI <-- Ring Indicator
Примечание: Direction is DTE (Computer) relative DCE (Modem).
Опубликовал: Joakim Ogren
Источник: ?
Все комментарии присылайте Joakim Ogren.

Serial (PC 25)

25 PIN D-SUB MALE (в компьютере)

25 PIN D-SUB MALE в компьютере.

Контакт Сигнал Dir Описание
1 SHIELD - Shield Ground
2 TXD --> Transmit Data
3 RXD <-- Receive Data
4 RTS --> Request to Send
5 CTS <-- Clear to Send
6 DSR <-- Data Set Ready
7 GND - System Ground
8 CD <-- Carrier Detect
9 n/c -  
10 n/c -  
11 n/c -  
12 n/c -  
13 n/c -  
14 n/c -  
15 n/c -  
16 n/c -  
17 n/c -  
18 n/c -  
19 n/c -  
20 DTR --> Data Terminal Ready
21 n/c -  
22 RI <-- Ring Indicator
23 n/c -  
24 n/c -  
25 n/c -  
Примечание: Direction is DTE (Computer) relative DCE (Modem).
Примечание: Do not connect SHIELD(1) to GND(7).
Опубликовал: Joakim Ogren
Источник: Amiga 4000 User's Guide from Commodore
Все комментарии присылайте Joakim Ogren.

Serial (Amiga 1000)

25 PIN D-SUB MALE (At the Amiga 1000)

25 PIN D-SUB MALE at the Amiga 1000.

Контакт Сигнал Dir Описание
1 SHIELD --- Shield Ground
2 TXD --> Transmit Data
3 RXD <-- Receive Data
4 RTS --> Request to Send
5 CTS <-- Clear to Send
6 DSR <-- Data Set Ready
7 GND --- System Ground
8 CD <-- Carrier Detect
9 n/c -  
10 n/c -  
11 n/c -  
12 n/c -  
13 n/c -  
14 -5V --> -5 Volts DC (50mA max)
15 AUDO --> Amiga Audio Out (Left)
16 AUDI <-- Amiga Audio In (Right)
17 EB - EB=Buffered Port Clock 716 kHz
18 /INT2 ? Interrupt 2
19 n/c -  
20 DTR --> Data Terminal Ready
21 +5V --> +5 Volts DC
22 n/c -  
23 +12V --> +12 Volts DC (20 mA max)
24 /C2 --> C2=Clock 3.58MHz
25 /RESET --> Reset
Примечание: Direction is DTE (Computer) relative DCE (Modem).
Примечание: Do not connect SHIELD(1) to GND(7).
Опубликовал: Joakim Ogren
Источник: Amiga 4000 User's Guide from Commodore
Все комментарии присылайте Joakim Ogren.

Serial (Amiga)

25 PIN D-SUB MALE (в компьютере)
25 PIN D-SUB FEMALE (На кабеле)

25 PIN D-SUB MALE в компьютере.
25 PIN D-SUB FEMALE На кабеле.

Контакт Сигнал Dir Описание
1 SHIELD --- Shield Ground
2 TXD --> Transmit Data
3 RXD <-- Receive Data
4 RTS --> Request to Send
5 CTS <-- Clear to Send
6 DSR <-- Data Set Ready
7 GND --- System Ground
8 CD <-- Carrier Detect
9 +12V --> +12 Volts DC (20 mA max)
10 -12V --> -12 Volts DC (20 mA max)
11 AUDO --> Amiga Audio Out (Left)
12 n/c - Speed Indicate
13 n/c -  
14 n/c -  
15 n/c -  
16 n/c -  
17 n/c -  
18 AUDI <-- Amiga Audio In (Right)
19 n/c -  
20 DTR --> Data Terminal Ready
21 n/c -  
22 RI <-- Ring Indicator
23 n/c -  
24 n/c -  
25 n/c -  
Примечание: Direction is DTE (Computer) relative DCE (Modem).
Примечание: Do not connect SHIELD(1) to GND(7).
Опубликовал: Joakim Ogren
Источник: Amiga 4000 User's Guide from Commodore
Все комментарии присылайте Joakim Ogren.

Serial (MSX)

9 PIN D-SUB FEMALE (в компьютере)

9 PIN D-SUB FEMALE в компьютере.

Контакт Сигнал Dir Описание
1 PG - Protective Ground
2 TXD --> Transmit Data
3 RXD <-- Receive Data
4 RTS --> Request to Send
5 CTS <-- Clear to Send
6 DSR <-- Data Set Ready
7 GND - Signal Ground
8 DCD <-- Carrier Detect
9 DTR --> Data Terminal Ready
Примечание: Direction is DTE (Computer) relative DCE (Modem).
Опубликовал: Joakim Ogren
Источник: Mayer's SV738 X'press I/O map
Все комментарии присылайте Joakim Ogren.

Serial (Printer)

25 PIN D-SUB MALE (At the printer)

25 PIN D-SUB MALE at the printer.

Контакт Сигнал Dir Описание
1 SHIELD --- Shield Ground
2 TXD --> Transmit Data
3 RXD <-- Receive Data
4 n/c - Not connected
5 n/c - Not connected
6 DSR <-- Data Set Ready
7 GND --- System Ground
8 DCD <-- Data Carrier Detect
9 n/c - Not connected
10 n/c - Not connected
11 ? --> Reverse Channel
12 n/c - Not connected
13 n/c - Not connected
14 n/c - Not connected
15 n/c - Not connected
16 n/c - Not connected
17 TTY-TXD --> TTY Receive Data
18 n/c - Not connected
19 n/c - Not connected
20 DTR --> Data Terminal Ready
21 n/c - Not connected
22 n/c - Not connected
23 ? --> TTY Receive Data Return
24 ? <-- TTY Transmit Data Return
25 TTY-RXD <-- TTY Receive Data
Опубликовал: Joakim Ogren, Petr Krc
Источник: ?
Все комментарии присылайте Joakim Ogren.

Mouse (PS/2)

6 PIN MINI-DIN FEMALE (At the computer)

6 PIN MINI-DIN FEMALE (PS/2 STYLE) в компьютере.

Контакт Сигнал Dir Описание
1 DATA <-> Key Data
2 n/c - Not connected
3 GND --- Gnd
4 VCC --> Power , +5 VDC
5 CLK --> Clock
6 n/c - Not connected
Примечание: Direction is Computer relative Mouse.
Опубликовал: Joakim Ogren, Gilles Ries
Источник: ?
Все комментарии присылайте Joakim Ogren.

Serial (15)

Seems to be available at a 14.4kbps modem called Speedster.

     2   4   6      10  12  14
- [][][][][][][][][][][][][][][] -
   1   3   5   7 8 9  11  13  15

НЕИЗВЕСТНЫЙ разъём (At the modem)

15 PIN FEMALE ??? at the modem.

Контакт Сигнал RS232 Dir Описание
1 GROUND GND --- Ground
2 SUSP#   ?  
3 COMBDSR# DSR --> Data Set Ready
4 COMBRTS# RTS <-- Request to Send
5 COMBCTS# CTS --> Clear to Send
6 COMBRI# RI --> Ring Indicator
7 n/c   ?  
8 GROUND GND --- Ground
9 +5VIN   <-- +5V DC In
10 COMBDTR# DTR <-- Data Terminal Ready
11 COMBDCD# CD --> Carrier Detect
12 COMBTXD TXD <-- Transmit Data
13 COMBRXD RXD --> Receive Data
14 SPKDATA   ?  
15 GROUND GND --- Ground
Опубликовал: Joakim Ogren, Joerg Brinkel
Источник: ?
Все комментарии присылайте Joakim Ogren.

DEC Dual RS-232

Found on the DEC Multia and DEC UDB (Universal Desktop Box). It contains two Serial ports on one connector. The 1st Port is located on the normal pins, and the 2nd port is located on some "spare" pins.

25 PIN D-SUB MALE (в компьютере)

25 PIN D-SUB MALE в компьютере.

Контакт Port Сигнал Dir Описание
1   n/c   Not connected
2 1 TXD --> Transmit Data
3 1 RXD <-- Receive Data
4 1 RTS --> Ready To Send
5 1 CTS <-- Clear To Send
6 1 DSR <-- Data Set Ready
7 1+2 GND - Ground
8 1 DCD <-- Data Carrier Detect
9   n/c   Not connected
10   n/c   Not connected
11 2 DTR --> Data Terminal Ready
12 2 DCD <-- Data Carrier Detect
13 2 CTS <-- Clear To Send
14 2 TXD --> Transmit Data
15   n/c   Not connected
16 2 RXD <-- Receive Data
17   n/c   Not connected
18   n/c   Not connected
19 2 RTS --> Ready To Send
20 1 DTR --> Data Terminal Ready
21   n/c   Not connected
22 1 RI <-- Ring Indicator
23 2 DSR <-- Data Set Ready
24   n/c   Not connected
25 2 RI <-- Ring Indicator
Примечание: Direction is DTE (Computer) relative DCE (Modem).
Опубликовал: Joakim Ogren, Greg A. Woods
Источники: Tommy's pinout Collection by Tommy Johnson
Источники: Digital UDB Information by Eric Smith
Все комментарии присылайте Joakim Ogren.

Macintosh RS-422

It's possible to connect RS-232 peripheral to the RS-422 port available on Macintosh computers. Use RXD- as RXD, TXD- as TXD, Ground RXD+, Leave TXD+ unconnected, GPi as CD.

8 PIN MINI-DIN FEMALE (At the computer)

8 PIN MINI-DIN FEMALE в компьютере.

Контакт Сигнал Dir Описание
1 HSKo --> Output Handshake
2 HSKi/CLK <-- Input Handshake or External Clock
3 TXD- --> Transmit Data (-)
4 GND --- Ground
5 RXD- <-- Receive Data (-)
6 TXD+ --> Transmit Data (+)
7 GPi <-- General Purpose Input
8 RXD+ <-- Receive Data (+)
Примечание: Direction is DTE (Computer) relative DCE (Modem).
Примечание: GPi is connected to SCC Data Carrier Detect (or to Receive/Transmit Clock if the VIA1 SYNC signal is high). Not connected on the Macintosh Plus, Classic, Classic II, LC, LC II or IIsi.
Опубликовал: Joakim Ogren, Pierre Olivier, Ben Harris, Nathan Schmidt
Источники: comp.sys.mac.comm FAQ Part 1
Источники: Apple Tech Info Library, Article ID: TECHINFO-0001699
Все комментарии присылайте Joakim Ogren.

RS422

37 PIN D-SUB MALE (At the DTE)
37 PIN D-SUB FEMALE (At the DCE)

37 PIN D-SUB MALE at the DTE (Computer).
37 PIN D-SUB FEMALE at the DCE (Modem).

Контакт Сигнал Dir Описание
1 GND --- Shield Ground
2 SRI <-- Signal Rate Indicator
3 n/c - Spare
4 SD --> Send Data
5 ST --> Send Timing
6 RD <-- Receive Data
7 RTS --> Request To Send
8 RR <-- Receiver Ready
9 CTS <-- Clear To Send
10 LL --> Local Loopback
11 DM <-- Data Modem
12 TR --> Terminal Ready
13 RR <-- Receiver Ready
14 RL --> Remote Loopback
15 IC <-- Incoming Call
16 SF/SR --> Select Frequency/Select Rate
17 TT --> Terminal Timing
18 TM <-- Test Mode
19 GND --- Ground
20 RC --- Receive Twister-Pair Common
21 GND --- Spare Twister-Pair Return
22 /SD --- Send Data TPR
23 GND --- Send Timing TPR
24 GND --- Receive Timing TPR
25 /RS --- Request To Send TPR
26 /RT --- Receive Timing TPR
27 /CS --- Clear To Send TPR
28 IS <-- Terminal In Service
29 /DM --- Data Mode TPR
30 /TR --- Terminal Ready TPR
31 /RR --- Receiver TPR
32 SS --> Select Standby
33 SQ <-- Signal Quality
34 NS --> New Signal
35 /TT --- Terminal Timing TPR
36 SB <-- Standby Indicator
37 SC --- Send Twister Pair Common
Примечание: Direction is DTE (Computer) relative DCE (Modem).
Опубликовал: Joakim Ogren, Petr Krc
Источник: ?
Все комментарии присылайте Joakim Ogren.

Macintosh Serial

Available on Macintosh Mac 512KE and earlier.

9 PIN D-SUB FEMALE (в компьютере)
9 PIN D-SUB MALE (At the Equipment)

9 PIN D-SUB FEMALE в компьютере.
9 PIN D-SUB MALE at the mouse cable.

Контакт Сигнал Dir Описание
1 GND --- Ground
2 +5V --> +5 VDC. Don't use this one, it may be converted into output handshake in later equipment.
3 GND --- Ground
4 Tx+ --> Transmit Data, positive going component
5 Tx- --> Transmit Data, negative going component
6 +12V --> +12 VDC
7 DSR/HSK <-- Handshake input. Signal name depends on mode: Used for Flow Control or Clock In.
8 Rx+ <-- Receive Data, positive going component
9 Rx- <-- Receive Data, negative going component
Примечание: Direction is Computer relative Equipment.
Опубликовал: Ben Harris
Источник: Apple Tech Info Library, Article ID: TECHINFO-0001424
Все комментарии присылайте Joakim Ogren.

C64 RS232 User Port

Available on the Commodore C64/C128. Software emulated. The signals does not have true RS232 levels. It's TTL level, and RXD/TXD is inverted. It's just the normal User Port, used as a RS232 port.

UNKNOWN (в компьютере)

НЕИЗВЕСТНЫЙ разъём в компьютере.

Контакт Сигнал RS232 Описание
A GND GND Protective Ground
B+C FLAG2+PB0 RxD Receive Data (Must be applied to both pins!)
D PB1 RTS Ready To Send
E PB2 DTR Data Terminal Ready
F PB3 RI Ring Indicator
H PB4 DCD Data Carrier Detect
K PB6 CTS Clear To Send
L PB7 DSR Data Set Ready
M PA2 TxD Transmit Data
N GND GND Signal Ground
Опубликовал: Joakim Ogren, Arwin Vosselman, Mark Sokos
Источник: Usenet posting in comp.sys.cbm, Help on modem -> c64 by Lasher Glenn
Источники: Commodore 64 Programmer's Reference Guide
Все комментарии присылайте Joakim Ogren.

DEC DLV11-J Serial

Available on the DEC DLV11-J Serial card

NOT DRAWN YET (at the serial card)

10 PIN IDC MALE at the Serial card.

Контакт Сигнал Dir Описание
1 CLK ? Clock
2 GND --- Ground
3 TXD+ --> Transmit data +
4 TXD- --> Transmit data - (0V for RS-232, Reader enable for 20mA)
5 GND --- Ground
6 n/c - Not connected (no pin)
7 RXD- <-- Receive data -
8 RXD+ <-- Receive data +
9 GND --- Ground
10 +12V --> +12 VDC
Примечание: Direction is Serial card relative other Devices.
Опубликовал: Ben Harris
Источник: DEC DLV11-J Printset, M8043-0-1, sheet 7
Все комментарии присылайте Joakim Ogren.

Cisco Console Port

Used to configure a Cisco router.

RJ45 FEMALE разъём (At the Cisco hub)
RJ45 FEMALE разъём (На кабелеs)

RJ45 FEMALE разъём at the Cisco routers.
RJ45 MALE разъём На кабелеs.

Контакт Сигнал Описание Dir
1 RTS Request To Send -->
2 DTR Data Terminal Ready -->
3 TXD Tranceive Data -->
4 n/c Not connected  
5 n/c Not connected  
6 RXD Receive Data <--
7 DSR Data Set Ready <--
8 CTS Clear To Send <--
Опубликовал: Joakim Ogren, Damien Miller
Источник: ?
Все комментарии присылайте Joakim Ogren.

RocketPort Serialport

Available at RocketPort serialport expansion cards.

RJ45 FEMALE разъём (At the RocketPort card)
RJ45 FEMALE разъём (На кабелеs)

RJ45 FEMALE разъём at the RocketPort card.
RJ45 MALE разъём На кабелеs.

Контакт Сигнал Описание Dir
1 RTS Request To Send -->
2 DTR Data Terminal Ready -->
3 GND Ground -->
3 TXD Tranceive Data -->
6 RXD Receive Data <--
6 DCD Data Carrier Detect <--
7 DSR Data Set Ready <--
8 CTS Clear To Send <--
Опубликовал: Joakim Ogren, Karl Asha
Источник: ?
Все комментарии присылайте Joakim Ogren.

CoCo Serial Printer

Available on the Tandy Color Computer, also known as CoCo.

4 PIN DIN 270° FEMALE (в компьютере)

4 PIN DIN 270° FEMALE в компьютере.

Контакт Сигнал Описание
1 NC  
2 /BUSY Enabled when the printer is busy
3 GND  
4 DATA RS-232 level data
Опубликовал: Rob Gill
Источник: Tandy TRP 100 printer manual
Все комментарии присылайте Joakim Ogren.

Conrad Electronics MM3610D

This connector is available on the Conrad Electronics Multimeter 3610D and is used to connect it to a computer.

UNKNOWN (At the multimeter).

5 PIN НЕИЗВЕСТНЫЙ разъём at the multimeter

Conrad Сигнал Описание Dir
1 RTS Request To Send <--
2 RXD Receive Data -->
3 TXD Transmit Data <--
4 DTR Data Terminal Ready <--
5 GND Ground ---
Примечание: Since the multimeter is a DCE the pin naming can seem strange.
Contributors: Joakim Ogren, Anselm Belz
Источник: ?
Все комментарии присылайте Joakim Ogren.

    

Поддержите сайт, поставте на нас ссылку.

Пример ссылкиКод ссылки
Схемы по радиосвязи
Схемы по радиосвязи
Выбрать другой баннер...

 
Сайт создан в системе uCoz
Сайт создан в системе uCoz